Fluke PM-3390B, PM-3380B, PM-3370B Syntax ABORt Description, Aborts the current acquisition

COMMAND REFERENCE 4 - 31

ABORt

Syntax: ABORt

Description:

The ABORt command resets the trigger system and places it in the "IDLE" state. Pending actions that were already started are finished immediately. The ABORt command is not finished until the pending actions have been terminated.

Note: The commands *RST and ABORt have the same effect on the trigger functions, except that ABORt does not affect the state of the INITiate:CONTinuous command. So, when an ABORt command is sent while the INITiate:CONTinuous is ON, the trigger system will leave the IDLE state at once.

Example:
Send → ABORt	Aborts the current acquisition.
Send → CONFigure:AC	Configures for AC-RMS value.
Send → READ:AC?	Initiates and reads the AC-RMS value.

Read ← <the measured AC-RMS value>