Fluke PM-3370B, PM-3380B, PM-3390B, PM-3394B Cursors Data, Type Unit Description, Math FFT Data

USING THE COMBISCOPE INSTRUMENTS		3 - 63
Example:
Send → *RST	’Switches MEAS1 & 2 off
Send → DISPlay:MENU MEASure	’Switches MEASURE menu on
Send → SYSTem:KEY 2;KEY 4	’Switches MEAS1 and MEAS2 on
Send → DISPlay:WINDow:TEXT1:DATA?	’Requests MEAS1 data
Read ← pkpk,6000E-04,V	’Response = peak-to-peak 0.6 volt.

CURSORS DATA:

The CURSORS function offers a wide variety of voltage and time readouts. The following readout selections can be made via the CURSORS - READOUT softkey menu:

<n>:	TYPE:	UNIT:	DESCRIPTION:
10	dV	V	Voltage difference (delta-V) between the cursors.
	dY	U	Vertical voltage (X-deflection on).
11	V1	V	Absolute voltage of cursor 1 to ground.
12	V2	V	Absolute voltage of cursor 2 to ground.
13	Vdc	V	DC voltage
20	dT	s	Time difference (delta-T) between the cursors.
21	F	Hz	Frequency (1/dT) in Hertz.
30	dX	U	Horizontal voltage (X-deflection on).
40	phase	*	The phase between two channels in degrees Celsius.
51	T1-trg	s	(* stands for degrees ° sign)
			The time between cursor 1 and the trigger event.
52	T2-trg	s	The time between cursor 2 and the trigger event.

MATH - FFT DATA:

The MATH1/MATH2 - FFT functions offer the readout of the relative or absolute frequency and amplitude. The following readout selections can be made via the CURSORS - READOUT and MATH - FFT - PARAM softkey menus:

<n>:	TYPE:	UNIT:	DESCRIPTION:
60	FFT-freq	Hz	FFT frequency in Hertz.
61	FFT-ampl	variable	FFT amplitude in:
			- Relative FFT selected: dB
			- Absolute FFT selected: dBm, dbμV, V (Vrms)