Fluke PM-3394B, PM-3380B Syntax DISPlayWINDow1TEXTnDATA?, Type Analog Mode Digital Mode

4 - 48 COMMAND REFERENCE

DISPlay:WINDow[1]:TEXT<n>:DATA?

Syntax: DISPlay:WINDow[1]:TEXT<n>:DATA?

[1]Indicates that the measurement result field is window 1. <n> 1 2 10 11 12 13 20 21 30 40 51 52 60 61

1MEAS1 result is returned.

2MEAS2 result is returned.

10 Delta-V/Delta-Y is returned under the following conditions:

TYPE:	ANALOG MODE:	DIGITAL MODE:
Delta-V	X-deflection off	X versus Y off
Delta-Y	X-deflection on	X versus Y on

11V1 is returned.

12V2 is returned.

13DC voltage (VDC) is returned.

20 Delta-T is returned under the following conditions:

		TYPE:	ANALOG MODE:	DIGITAL MODE:
		Delta-T	X-deflection off	X versus Y off
21	Frequency (1 /		delta-T) is returned.
30	Delta-X is returned under the following conditions:
		TYPE:	ANALOG MODE:	DIGITAL MODE:
		Delta-X	X-deflection on	X versus Y on

40The phase between 2 channels is returned.

51T1-trg is returned.

52T2-trg is returned.

60FFT frequency in Hz is returned.

61FFT amplitude is returned expressed in:

-dB (relative value)

-dBm, dbμV, or Vrms (absolute value)

Response: <ASCII_data>

<ASCII_data> A sequence of 7-bit ASCII characters. Example:

Send → DISPlay:WINDow:TEXT1:DATA?

Read ← pkpk,6084E-04,V

Response is peak-peak value of 608.4 mV (MEAS1).

Description:

The DISPlay:WINDow[1]:TEXT<n>:DATA? query returns the measured data as displayed on the upper line(s) of the screen of your CombiScope instrument.