Fujitsu MB86617A manual Bridge-Ach

LSI Specification				MB86617A
BIT	Bit Name	Action	Value	Function
				Set EMI information which are set in IPH of empty packet transmitted from
				bridge-Ach.
6 - 5	IPH EMI-A	Read/	-	Valid only when IPH select-A (bit7) is set to ‘1’.
		Write		(MSB: bit6, LSB: bit5)
				EMI information after transmitting valid data depends on the setting of EMI
				select-A (10h-bit4).
				Set Odd/Even value which is set in IPH of empty packet transmitted from
		Read/		bridge-Ach.
4	IPH OE-A		-	Valid only when IPH select-A (bit7) is set to ‘1’.
		Write
				EMI information after transmitting valid data depends on the setting of o/e select-A
				(3Eh-bit8).
		Read	-	Always indicate ‘0’.
3 - 0	reserved
		Write	-	Always write in ‘0’.

Rev.1.0 79 Fujitsu VLSI