Fujitsu MB86617A manual Value Function

LSI Specification				MB86617A
BIT	Bit Name	Active	Value	Function
9~8	reserved	Read	-	Always indicate ‘0’.
			0	Indicates that CGMS information input from port A of TSP IC I/F is not changed.
7	CG chg-A	Read
			1	Indicates that CGMS information input from port A of TSP IC I/F is changed.
				Clears to ‘0’ by lead of this register.
			0	Indicates that TS classification ID input from port A of TSP IC I/F is not changed.
6	TS chg-A	Read
				Indicates that TSCH classification ID input from port B of TSP IC I/F is not
			1	consistent with TSCH classification ID (10h- bit12 to 7 set TS-ID- A or 12h- bit12 to
				7 set TS-ID-B) to be stored to FIFO.
				Clears to ‘0’ by lead of this register.
			0	Indicates that synchronization byte of received MPEG2-TS input from CP -IC by
				bridge-Bch is 47h
5	no 47h -A	Read
				Indicates that synchronization byte of received MPEG2 -TS input from CP -IC by
			1	bridge-Bch is not 47h
				Clears to ‘0’ by lead of this register.
	TSP FIFO		0	Indicates that FIFO on TSP IC I/F side of bridge-Ach is not full.
4		Read
	full-A
			1	Indicates that FIFO on TSP IC I/F side of bridge-Ach is full.
	TSP FIFO		0	Indicates that FIFO on TSP IC I/F side of bridge-Ach is not empty.
3		Read
	emp-A
			1	Indicates that FIFO on TSP IC I/F side of bridge-Ach is empty.
			0	Indicates transmit data length input from TSP IC I/F is normal.
	T x-length-err -
2		Read		Indicates transmit data length input from TSP IC I/F is not consistent with
	A			specified format data length.
			1
				Deletes transmit data without writing into FIFO.
				Clears to ‘0’ by lead of this register.
1 - 0	reserved	Read	-	Always indicate ‘0’.

Rev.1.0 47 Fujitsu VLSI