Table 4-2Device control-panel messages (continued)

Message

Description and actions

 

 

Authentication failed: Error code ###

Authentication failed for a reason other than incorrect user-

 

specified information (username and password). The

 

following error codes might appear in the error message.

 

●

201: Unexpected failure.

 

● 202: Authentication is not available. The service is too

 

 

busy to accept the authentication request.

 

● 203: Authentication is not supported.

 

● 204: Encryption is not supported.

 

●

205: Invalid parameter

● 206: Invalid LDAP logon method (the LDAP server does not support this logon method.)

● 207: Unexpected LDAP failure occurred, either because the LDAP server failed or the connection is bad.

● 208: The LDAP server not available; it either is not a server or is not running LDAP.

● 209: The LDAP server is too busy.

● 210: Invalid LDAP username because the user does not have access to the LDAP server.

● 211: Invalid LDAP user password

● 212: Invalid LDAP user credentials

● 213: Invalid LDAP user domain

● 214: Invalid LDAP privileges because the user does not have permission to read from the LDAP database.

● 215: Invalid LDAP user record because the user does not have an entry in the LDAP database.

● 216: Invalid LDAP container because the search root is invalid .

● 217: Invalid LDAP name attribute

● 218: Invalid LDAP e-mail-name attribute

● 219: Invalid fax attribute

● 220: Invalid LDAP display-name attribute

● 221: No e-mail address at the specified attribute

● 222: Tested user does not have an account on the domain

ENWW

Control panel messages 141