HP MFP Sending Software 4.9X manual Configure the device to use Send To Workflows

8.Under Scan Settings, select the settings for the scanned file. These should be the settings that the third-party software program that processes the file requires.

9.Click OK to save the workflow form.

10.Click Apply to save the settings on the Workflow tab.

Configure the Device

The Send to Workflows subtab is shown in the following illustration.

Figure 3-41Send to Workflows subtab in the Configure Devices tab set

1

2

Table 3-28Send to Workflows subtab – Configure Devices tab set

Callout	Component	Description
1	Enable Send to	Click to select the Enable Send to Workflows check box.
	Workflows
2	Workflow Group	Select a workflow group from the drop-down menu.

Configure the device to use Send To Workflows

1.Click to select the Enable Send to Workflows check box on the Send To Workflows tab on the Device Configuration tab set.

2.Select a workflow from the Workflow Group drop-down menu.

3.Click Apply.

124 Chapter 3 Installation and configuration ENWW