5.Select the fax notification options in the Notification group box.
●Make a selection from the Condition on which to notify
●When notification is enabled, the Method used to deliver notification
NOTE: Notification is not available for all fax delivery methods.
6.Select the quality of the fax by selecting a resolution from the Resolution
NOTE: The user cannot change the resolution setting from the device control panel.
7.Optionally, provide a Billing Code that can be used for accounting.
If the user needs to type or change the billing code, select the Allow users to edit billing code check box. In addition, type in the minimum number of characters to use for a billing code value in the Minimum Length text box.
8.Configure the Common Analog Fax settings:
●Configure the Device Modem settings.
◦Country/Region. Type the country/region in which the device is located.
◦Company Name. Type the company name.
◦Phone Number. Type the phone number to which the device internal modem is connected.
◦
●Configure the Fax Archive settings.
◦Enable Fax Archiving
◦Type of fax job to archive
◦
●Configure the Fax Forwarding settings.
◦Enable Fax Forwarding
◦Type of fax job to forward
◦Forwarding number
110 | Chapter 3 Installation and configuration | ENWW |