HP MFP Sending Software 4.9X manual Log subtab on the Configure Devices tab set

Log subtab

The Log subtab in the Configure Devices tab set displays the Digital Sending activities carried out by the specific selected device.

Figure 3-23Log subtab in the Configure Devices tab set

1 2 3 4

5

	6	7	8	9
The Log subtab contains the following controls.
Table 3-16Log subtab on the Configure Devices tab set
Callout	Component		Description
1	Device		This list shows the individual device on which the event occurred.
	Information
2	User		This column shows the user that was logged in to the device when the event
			occurred.
3	Job Status		Status indicator
4	Log Time		This column lists the time each event occurred.
5	Max entries		Use this drop-down list to select the number of entries that appear in this
			window. The options are 0, 32, 256, 512, and 1024.

NOTE: Selecting a maximum entries option greater than 32 can cause a delay when starting the Configuration Utility.

84 Chapter 3 Installation and configuration ENWW