Index
GPIB-1014 User Manual Index-3 © National Instruments Corporation
Ccabling, 3-10
capability codes for GPIB-1014, 2-13 to 2-15
CC (Carry Cycle Bit), 4-65
CCR. See Channel Control Register (CCR).
CDO[7-0] (Command/Data Out Bits 7 through 0), 4-7
CDOR. See Command/Data Out Register (CDOR).
CER. See Channel Error Register (CER).
chaining operations
array chaining operations, 6-19 to 6-20
linked chaining operations, 6-20 to 6-21
Channel Control Register (CCR), 4-56 to 4-57
Channel Error Register (CER), 4-60
Channel Priority Register (CPR), 4-61
Channel Status Register (CSR), 4-58 to 4-59
Chip Reset command
codes for, 4-28
description, 4-29
CHN (Chain Bits 3 through 2), 4-53
CIC (Controller-In-Charge Bit), 4-20
Clear IFC command
codes for, 4-28
description, 4-32
Clear Parallel Poll Flag command
codes for, 4-28
description, 4-31
Clear REN command
codes for, 4-28
description, 4-32
CLK[3-0] (Clock Bits 3 through 0), 4-34
clock and reset circuitry
definition, 2-12
theory of operation, 6-4 to 6-5
CNT (Continue Bit), 4-56, 6-18
CNT[2-0] (Control Code Bits 2 through 0), 4-27
CO (Command Out Bit), 4-16
CO IE (Command Out Interrupt Enable Bit), 4-16
COC (Channel Operation Complete Bit), 4-58, 4-62
COM[4-0] (Command Code Bits 4 through 0), 4-27
COMMAND-CMD sample program, C-20
Command/Data Out Register (CDOR), 4-7
Command Pass Through Register (CPTR), 4-25 to 4-26
COMMAND SEND-CSEND sample program, C-19
commands
auxiliary commands
detailed description, 4-29 to 4-32
summary table, 4-28