Index
© National Instruments Corporation Index-16 GPIB-1014 User Manual
Interrupt Status Register 1 (ISR1), 4-8 to 4-13
Interrupt Status Register 2 (ISR2), 4-14 to 4-18
µPD7210 internal GPIB interface registers (chart), 2-3
overview, 4-3
Serial Poll Mode Register (SPMR), 4-19
Serial Poll Status Register (SPSR), 4-19
writing to hidden registers, 4-4
mnemonics for, 4-3
register map, 4-1 to 4-2
size of, 4-2
terminology related to, 4-3
REM (Remote Bit), 4-16
REMC (Remote Change Bit), 4-17
REMC IE (Remote Change Interrupt Enable Bit), 4-17
REMOTE ENABLE-REN sample program, C-8
REN (remote enable) line, E-3
REOS (END on EOS Received Bit), 4-37
REQG (DMA Request Generation Bits 1 through 0), 4-54
reset. See system reset.
Return to Local (rtl) command
codes for, 4-28
description, 4-30
RFD Holdoff mode, 4-38
RFD (Ready for Data) message, 4-6
ROR* (Release On Request Bit), 4-65
rsv (Request Service Bit), 4-19
SS (Status Bit Polarity Bit), 4-36
S[6-1] (Serial Poll Status Bits 6 through 1), 4-19
S8 (Serial Poll Status Bit 8), 4-19
SAB (Software Abort Bit), 4-56, 6-18
sample programs
COMMAND-CMD, C-20
COMMAND SEND-CSEND, C-19
DATA SEND-DSEND, C-14 to C-16
GPIB-1014 Sample Functions for Driver, C-2 to C-4
INITIALIZE-INIT, C-5 to C-6
INTERFACE CLEAR-IFC, C-7
overview, C-1
PASS CONTROL-PASSC, C-21
READ, C-12 to C-13
RECEIVE-RCV, C-11
REMOTE ENABLE-REN, C-8
WRITE, C-17 to C-18
SC (System Controller Bit), 4-67
schematic diagrams, B-1 to B-9