Index
GPIB-1014 User Manual Index-11 © National Instruments Corporation
register map, 4-1
Serial Poll Mode Register (SPMR), 4-19
Serial Poll Status Register (SPSR), 4-19
writing to hidden registers, 4-4
Internal Counter Register (ICR), 4-34
interrupt control. See GPIB Synchronization and Interrupt Control.
Interrupt Mask Register 1 (IMR1), 4-8 to 4-13
Interrupt Mask Register 2 (IMR2), 4-14 to 4-18
Interrupt Status Register 1 (ISR1), 4-8 to 4-13
Interrupt Status Register 2 (ISR2), 4-14 to 4-18
Interrupt Vector Registers, 4-62
interrupter. See also GPIB Synchronization and Interrupt Control.
definition, 2-12
description of, 2-6
GPIB-1014 IEEE 1014 interrupter compliance levels, 2-15
programming considerations, 5-20 to 5-21
theory of operation, 6-9
INTRQ (Interrupt Request Bits 7 through 5), 4-64
INV (Invert Bit), 4-39
ISR1. See Interrupt Status Register 1 (ISR1).
ISR2. See Interrupt Status Register 2 (ISR2).
ISS (Individual Status Select Bit), 4-39
J
jumpers and switches
base address, 3-3 to 3-4
configuration, 3-1 to 3-2
DMA address modifier code output
default settings of AM code jumpers W3, W4 and W5, 3-5
programming values for default settings W3, W4 and W5, 3-6
setting AM code bits (AM5-AM0), 3-6
parts locator diagram, 3-2
for Supervisor or Non-privileged access, 3-3
L
LA (Listener Active Bit), 4-21
lines. See signals and lines.
linked chaining operations, 6-20 to 6-21
Listen command
codes for, 4-28
description, 4-31
Listen in Continuous Mode command
codes for, 4-28
description, 4-31 to 4-32
LLO (Local Lockout) command, 4-25