Switching Commands
102
ProSafe Managed Switch
dot1x unauthenticated-vlan
Use this command to configure the unauthenticated VLAN associated with that port. The
unauthenticated VLAN ID can be a valid VLAN ID from 0-Maximum supported VLAN ID
(4093 for 7000 series). The unauthenticated VLAN must be statically configured in the VLAN
database to be operational. By default, the unauthenticated VLAN is 0, i.e. invalid and not
operational.
Default
Format dot1x unauthenticated-vlan <vlan id>
Mode
no dot1x unauthenticated-vlan
This command resets the unauthenticated-vlan associated with the port to its default value.
Format no dot1x unauthenticated-vlan
Mode
dot1x user
This command adds the specified user to the list of users with access to the specified port or
all ports. The <user> parameter must be a configured user.
Format dot1x user <user> {<unit/slot/port> | all}
Mode
no dot1x user
This command removes the user from the list of users with access to the specified port or all
ports.
Format no dot1x user <user> {<unit/slot/port> | all}
Mode
clear dot1x authentication-history
This command clears the authentication history table captured during successful and
unsuccessful authentication on all interface or the specified interface.
Format clear dot1x authentication-history [unit/slot/port]
Mode
0
Interface Config
Interface Config
Global Config
Global Config
Global Config