Log Messages
732
ProSafe Managed Switch
Mac based
VLANS vlanMacVlanChangeCallback: Failed to
add an entry This appears when a dtl fails to add an
entry for a vlan add notify event.
Mac based
VLANS vlanMacVlanChangeCallback: Failed to
delete an entry This appears when a dtl fails to delete an
entry for an vlan delete notify event.
Table 24. 802.1x Log Messages
Component Message Cause
802.1X function: Failed calling dot1xIssueCmd 802.1X message queue is full
802.1X function: EAP message not received from
server RADIUS server did not send required EAP
message
802.1X function: Out of System buffers 802.1X cannot process/transmit message
due to lack of internal buffers
802.1X function: could not set state to
<authorized/unauthorized>, intf xxx DTL call failed setting authorization state of
the port
802.1X dot1xApplyConfigData: Unable to
<enable/disable> dot1x in driver DTL call failed enabling/disabling 802.1X
802.1X dot1xSendRespToServer:
dot1xRadiusAccessRequestSend failed Failed sending message to RADIUS server
802.1X dot1xRadiusAcceptProcess: error calling
radiusAccountingStart, ifIndex=xxx Failed sending accounting start to RADIUS
server
802.1X function: failed sending terminate cause,
intf xxx Failed sending accounting stop to RADIUS
server
Table 25. IGMP Snooping Log Messages
Component Message Cause
IGMP Snooping function: osapiMessageSend failed IGMP Snooping message queue is full
IGMP Snooping Failed to set global igmp snooping mode to
xxx Failed to set global IGMP Snooping mode
due to message queue being full
IGMP Snooping Failed to set igmp snooping mode xxx for
interface yyy Failed to set interface IGMP Snooping
mode due to message queue being full
IGMP Snooping Failed to set igmp mrouter mode xxx for
interface yyy Failed to set interface multicast router
mode due to IGMP Snooping message
queue being full
IGMP Snooping Failed to set igmp snooping mode xxx for
vlan yyy Failed to set VLAN IGM Snooping mode
due to message queue being full
Table 23. Mac-based VLANs Log Messages
Component Message Cause