Switching Commands
42
ProSafe Managed Switch
no shutdown
This command enables a port.
Format no shutdown
Mode
shutdown all
This command disables all ports.
Note: You can use the shutdown all command on physical and
port-channel (LAG) interfaces, but not on VLAN routing interfaces.
no shutdown all
This command enables all ports.
Format no shutdown all
Mode
speed
This command sets the speed and duplex setting for the interface.
Format speed [{auto}] [{<100 | 10 | 10G> {<half-duplex | full-duplex>}}]
Mode
Format shutdown
Mode Interface Config
Interface Config
Format shutdown all
Mode Global Config
Global Config
Interface Config
Acceptable
Values Definition
100h 100BASE-T half duplex
100f 100BASE-T full duplex
10h 10BASE-T half duplex