Utility Commands
634
ProSafe Managed Switch
UDLD Mode The UDLD mode configured on this interface. This is either “Normal” or “Aggressive.”.
UDLD Status The status of the link as determined by UDLD. The options are:
• “Undetermined” - UDLD has not collected enough information to determine the state
of the port
• “Not applicable” - UDLD is disabled, either globally or on the port
• “Shutdown” - UDLD has detected a unidirectional link and shutdown the port, That
is, the port is in an errDisabled state.
• “Bidirectional” - UDLD has detected a bidirectional link.
• “Undetermined(Link Down)” - The port would transition into this state when the port
link physically goes down due to any reasons other than the port been put into
D-Disable mode by UDLD protocol on the switch.
Term Definition