Stacking Commands
25
ProSafe Managed Switch
to any module that is inserted into the slot. If a card is disabled, all the ports on the device are
operationally disabled and shown as “unplugged” on management screens.
no set slot disable
This command unconfigures the administrative mode of the slot(s). If you specify [all], the
command removes the configuration from all slots, otherwise the configuration is removed
from the slot identified by <unit/slot>.
If a card or other module is present in the slot, this administrative mode removes the
configuration from the contents of the slot. If the slot is empty, this administrative mode
removes the configuration from any module inserted into the slot. If a card is disabled, all the
ports on the device are operationally disabled and shown as “unplugged” on management
screens.
set slot power
This command configures the power mode of the slot(s) and allows power to be supplied to a
card located in the slot. If you specify [all], the command is applied to all slots, otherwise
the command is applied to the slot identified by <unit/slot>.
Use this command when installing or removing cards. If a card or other module is present in
this slot, the power mode is applied to the contents of the slot. If the slot is empty, the power
mode is applied to any card inserted into the slot.
no set slot power
This command unconfigures the power mode of the slot(s) and prohibits power from being
supplied to a card located in the slot. If you specify [all], the command prohibits power to
all slots, otherwise the command prohibits power to the slot identified by <unit/slot>.
Use this command when installing or removing cards. If a card or other module is present in
this slot, power is prohibited to the contents of the slot. If the slot is empty, power is prohibited
to any card inserted into the slot.
Format set slot disable [<unit/slot> | all]
Mode Global Config
Format no set slot disable [<unit/slot> | all]
Mode Global Config
Format set slot power [<unit/slot> | all]
Mode Global Config
Format no set slot power [<unit/slot> | all]
Mode Global Config