NETGEAR GSM7228PS-100NAS show lldp, show lldp interface

Switching Commands
198
ProSafe Managed Switch
show lldp
Use this command to display a summary of the current LLDP configuration.
Format show lldp
Mode
Transmit
Interval
Transmit Hold
Multiplier
Re-initialization
Delay
Notification
Interval
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific
interface or for all interfaces.
Format show lldp interface {<unit/slot/port> | all}
Mode
Interface
Link
Transmit
Receive
Notify
TLVs
Mgmt
Privileged Exec
Term Definition
How frequently the system transmits local data LLDPDUs, in seconds.
The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
The delay before re-initialization, in seconds.
How frequently the system sends remote data change notifications, in seconds.
Privileged Exec
Term Definition
The interface in a unit/slot/port format.
Shows whether the link is up or down.
Shows whether the interface transmits LLDPDUs.
Shows whether the interface receives LLDPDUs.
Shows whether the interface sends remote data change notifications.
Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can
be 0 (Port Description), 1 (System Name), 2 (System Description), or 3 (System
Capability).
Shows whether the interface transmits system management address information in the
LLDPDUs.