NETGEAR GSM7228PS-100NAS show ip dhcp pool configuration

Service DHCP
Number of Ping
Packets
Conflict
Logging
BootP
Automatic
Utility Commands
589
ProSafe Managed Switch
show ip dhcp pool configuration
This command displays pool configuration. If all is specified, configuration for all the pools
is displayed.
Format show ip dhcp pool configuration {<name> | all}
Modes • Privileged EXEC
• User EXEC
Pool Name
Pool Type
Lease Time
DNS Servers
Default Routers
The following additional field is displayed for Dynamic pool type:
Network
The following additional fields are displayed for Manual pool type:
Client Name
Client Identifier
Hardware
Address
Hardware
Address Type
Host
Term Definition
The field to display the status of dhcp protocol.
The maximum number of Ping Packets that will be sent to verify that an ip address id not
already assigned.
Shows whether conflict logging is enabled or disabled.
Shows whether BootP for dynamic pools is enabled or disabled.
Field Definition
The name of the configured pool.
The pool type.
The lease expiration time of the IP address assigned to the client.
The list of DNS servers available to the DHCP client .
The list of the default routers available to the DHCP client
Field Definition
The network number and the mask for the DHCP address pool.
Field Definition
The name of a DHCP client.
The unique identifier of a DHCP client.
The hardware address of a DHCP client.
The protocol of the hardware platform.
The IP address and the mask for a manual binding to a DHCP client.