IP Multicast Commands
366
ProSafe Managed Switch
show ip igmp interface membership

This command displays the list of interfaces that have registered in the multicast group.

Format show ip igmp interface membership <multiipaddr> [detail]
Mode
Interface
Interface IP
State
Group
Compatibility
Mode
Source Filter
Mode

If you use the detail keyword, the following fields appear:

Interface
Group
Compatibility
Mode
Source Filter
Mode
Source Hosts
Expiry Time
show ip igmp interface stats

This command displays the IGMP statistical information for the interface. The statistics are

only displayed when the interface is enabled for IGMP.

Format show ip igmp interface stats <unit/slot/port>
Modes • Privileged EXEC
• User EXEC
Privileged EXEC
Term Definition
Valid unit, slot and port number separated by forward slashes.
The IP address of the interface participating in the multicast group.
The interface that has IGMP in Querier mode or Non-Querier mode.
The group compatibility mode (v1, v2 or v3) for the specified group on this interface.
The source filter mode (Include/Exclude) for the specified group on this interface. This is
“-----” for IGMPv1 and IGMPv2 Membership Reports.
Term Definition
Valid unit, slot and port number separated by forward slashes.
The group compatibility mode (v1, v2 or v3) for the specified group on this interface.
The source filter mode (Include/Exclude) for the specified group on this interface. This is
“-----” for IGMPv1 and IGMPv2 Membership Reports.
The list of unicast source IP addresses in the group record of the IGMPv3 Membership
Report with the specified multicast group IP address. This is “-----” for IGMPv1 and
IGMPv2 Membership Reports.
The amount of time remaining to remove this entry before it is aged out. This is “-----” for
IGMPv1 and IGMPv2 Membership Reports.