NETGEAR GSM7228PS-100NAS lldp med all, lldp med confignotification all, lldp med faststartrepeatcount

Switching Commands
205
ProSafe Managed Switch
lldp med all
Format lldp med all
Mode
Use this command to configure LLDP-MED on all the ports
no lldp med all
Use this command to remove LLDP-MD on all ports.
Format no lldp med all
Mode
lldp med confignotification all
U
Format lldp med confignotification all
Mode
se this command to configure all the ports to send the topology change notification.
no lldp med confignotification all
Use this command to disable all the ports to send the topology change notification.
Format no lldp med confignotification all
Mode
lldp med faststartrepeatcount
Use this command to set the value of the fast start repeat count. [count] is the number of
LLDP PDUs that will be transmitted when the product is enabled. The range is 1 to 10.
Default
Format lldp med faststartrepeatcount [count]
Mode
no lldp med faststartrepeatcount
Use this command to return to the factory default value.
Format no lldp med faststartrepeatcount
Mode
Global Config
Global Config
Global Config
Global Config
3
Global Config
Global Config