IPv6 Multicast Commands
451
ProSafe Managed Switch
no ipv6 mld query-max-response-time
This command resets the MLD query max response time for the interface to the default
value.
Format no ipv6 mld query-max-response-time
Mode
ipv6 mld last-member-query-interval
Use this command to set the last member query interval for the MLD interface, which is the
value of the maximum response time parameter in the group specific queries sent out of this
interface. The range for <last-member-query-interval> is 1 to 65535 milliseconds.
Default
Format ipv6 mld last-member-query-interval <last-member-query-interval>
Mode
no ipv6 mld last-member-query-interval
Use this command to reset the <last-member-query-interval> parameter of the
interface to the default value.
Format no ipv6 mld last-member-query-interval
Mode
ipv6 mld last-member-query-count
Use this command to set the number of listener-specific queries sent before the router
assumes that there are no local members on the interface. The range for
<last-member-query-count> is 1 to 20.
Default
Format ipv6 mld last-member-query-count <last-member-query-count>
Mode
no ipv6 mld last-member-query-count
Use this command to reset the <last-member-query-count> parameter of the interface
to the default value.
Format no ipv6 mld last-member-query-count
Mode
Interface Config
1000 milliseconds
Interface Config
Interface Config
2
Interface Config
Interface Config