Switching Commands
227
ProSafe Managed Switch
show isdp interface

This command displays ISDP settings for the specified interface.

Format show isdp interface {all | <unit/slot/port>}
Mode
Mode
show isdp entry

This command displays ISDP entries. If the device id is specified, then only entries for that

device are shown.

Format show isdp entry {all | deviceid}
Mode
Device ID
IP Addresses
Platform
Interface
Port ID
Hold Time
Version
Advertisement
Version
Capability
show isdp neighbors

This command displays the list of neighboring devices.

Format show isdp neighbors [ {<unit/slot/port> | detail} ]
Mode
Privileged EXEC
Term Definition
ISDP mode enabled/disabled status for the interface(s).
Privileged EXEC
Term Definition
The device ID associated with the neighbor which advertised the information.
The IP address(es) associated with the neighbor.
The hardware platform advertised by the neighbor.
The interface (slot/port) on which the neighbor's advertisement was received.
The port ID of the interface from which the neighbor sent the advertisement.
The hold time advertised by the neighbor.
The software version that the neighbor is running.
The version of the advertisement packet received from the neighbor.
ISDP Functional Capabilities advertised by the neighbor.
Privileged EXEC