NETGEAR GSM7228PS-100NAS spanning-tree bpduguard, spanning-tree bpdumigrationcheck, spanning-tree configuration name

Switching Commands
49
ProSafe Managed Switch
spanning-tree bpduguard
Use this command to enable BPDU Guard on the switch.
Default
Format spanning-tree bpduguard
Mode
no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
Format no spanning-tree bpduguard
Mode
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple
spanning tree (MSTP) BPDUs. Use the <unit/slot/port> parameter to transmit a BPDU
from a specified interface, or use the all keyword to transmit BPDUs from all interfaces.
This command forces the BPDU transmission when you execute it, so the command does
not change the system configuration or have a “no” version.
Format spanning-tree bpdumigrationcheck {<unit/slot/port> | all}
Mode
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration
that this switch is currently using. The <name> is a string of up to 32 characters.
Default
Format spanning-tree configuration name <name>
Mode
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format no spanning-tree configuration name
Mode
disabled
Global Config
Global Config
Global Config
base MAC address in hexadecimal notation
Global Config
Global Config