Captive Portal Commands
770
ProSafe Managed Switch
has been reached the user will be disconnected. <1-128> is the user ID. The range of octets
is 0-4294967295. 0 indicates to use the global limit. Use the “no” form of this command to
reset the limit to the default.
Default 0
Format user <1-128> max-total-octets octets
Mode
no user max-total-octets
Use this command to reset the limit to the default.
Format no user <1-128> max-total-octets
Mode
show captive-portal user
Use this command to display all configured users or a specific user in the captive portal local
user database.
Format show captive-portal user [ <1-128> ]
Mode
If the user ID is specified, the following terms are displayed.
Captive Portal Configuration mode
Captive Portal Configuration mode
Privileged EXEC mode
Term Definition
User ID The user ID
User Name The user name
Session Timeout Logout once session timeout is reached (seconds). If the value is 0 then use the value
configured for the captive portal.
Idle Timeout Logout once idle timeout is reached (seconds). If the attribute is 0 then use the value
configured for the captive portal.
Group ID The group ID associated with the user
Group Name The group name
Term Definition
Password
Configured If the password is configured.
Max Bandwidth
Up (bytes/sec) Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send
data into the network. If the value is 0 then use the value configured for the captive
portal.