NETGEAR GSM7228PS-100NAS lldp transmit-mgmt, lldp notification

Switching Commands
196
ProSafe Managed Switch
Use port-desc to transmit the port description TLV. To configure the port description, see
description on page 41
Default
Format lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode
no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command without
parameters to remove all optional TLVs from the LLDPDU.
Format no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode
lldp transmit-mgmt
Use this command to include transmission of the local system management address
information in the LLDPDUs.
Default
Format lldp transmit-mgmt
Mode
no lldp transmit-mgmt
Use this command to include transmission of the local system management address
information in the LLDPDUs. Use this command to cancel inclusion of the management
information in LLDPDUs.
Format no lldp transmit-mgmt
Mode
lldp notification
Use this command to enable remote data change notifications.
Default
Format lldp notification
Mode
all optional TLVs are included
Interface Config
Interface Config
enabled
Interface Config
Interface Config
disabled
Interface Config