IPv6 Commands
418
ProSafe Managed Switch
Maximum
Number of
Retransmit
Entries
The maximum number of LSAs that can be waiting for acknowledgment at any given
time.
Retransmit
Entries High
Water Mark
The highest number of LSAs that have been waiting for acknowledgment.
External LSDB
Limit The maximum number of non-default AS-external-LSAs entries that can be stored in the
link-state database.
Default Metric Default value for redistributed routes.
Default Passive
Setting Shows whether the interfaces are passive by default.
Default Route
Advertise Indicates whether the default routes received from other source protocols are advertised
or not.
Always Shows whether default routes are always advertised.
Metric The metric for the advertised default routes. If the metric is not configured, this field is
blank.
Metric Type Shows whether the routes are External Type 1 or External Type 2.
Number of
Active Areas The number of active OSPF areas. An “active” OSPF area is an area with at least one
interface up.
AutoCost Ref
BW Shows the value of the auto-cost reference bandwidth configured on the router.
Maximum Paths The maximum number of paths that OSPF can report for a given destination.
Redistributing This field is a heading and appears only if you configure the system to take routes
learned from a non-OSPF source and advertise them to its peers.
Source Shows source protocol/routes that are being redistributed. Possible values are static,
connected, BGP, or RIP.
Metric The metric of the routes being redistributed.
Metric Type Shows whether the routes are External Type 1 or External Type 2.
Tag The decimal value attached to each external route.
Subnets For redistributing routes into OSPF, the scope of redistribution for the specified protocol.
Distribute-List The access list used to filter redistributed routes.
Term Definition