NETGEAR GSM7228PS-100NAS set mld maxresponse, set mld mcrtexpiretime

Switching Commands
183
ProSafe Managed Switch
interface from the entry. This value must be greater than the MLDv2 Maximum Response
time value. The range is 2 to 3600 seconds.
Default
Format set mld groupmembership-interval vlanid 2-3600
Mode • Interface Config
• Global Config
• VLAN Mode
no set groupmembership-interval
Use this command to set the MLDv2 Group Membership Interval time to the default value.
Format no set mld groupmembership-interval
Mode • Interface Config
• Global Config
• VLAN Mode
set mld maxresponse
Use this command to set the MLD Maximum Response time for the system, on a particular
interface or VLAN. The Maximum Response time is the amount of time in seconds that a
switch will wait after sending a query on an interface because it did not receive a report for a
particular group in that interface. This value must be less than the MLD Query Interval time
value. The range is 1 to 65 seconds.
Default
Format set mld maxresponse 1-65
Mode • Global Config
• Interface Config
• VLAN Mode
no set mld maxresponse
Use this command to set the max response time (on the interface or VLAN) to the default
value.
Format no set mld maxresponse
Mode • Global Config
• Interface Config
• VLAN Mode
set mld mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
260 seconds
10 seconds