NETGEAR GSM7228PS-100NAS dos-control icmpv4, dos-control icmpv6

Switching Commands
220
ProSafe Managed Switch
no dos-control tcpfinurgpsh
This command sets disables TCP FIN and URG and PSH and SEQ=0 checking Denial of
Service protections.
Format no dos-control tcpfinurgpsh
Mode
dos-control icmpv4
This command enables Maximum ICMPv4 Packet Size Denial of Service protections. If the
mode is enabled, Denial of Service prevention is active for this type of attack. If ICMPv4 Echo
Request (PING) packets ingress having a size greater than the configured value, the packets
will be dropped if the mode is enabled.
Default
Format dos-control icmpv4 <0-16384>
Mode
no dos-control icmpv4
This command disables Maximum ICMP Packet Size Denial of Service protections.
Format no dos-control icmpv4
Mode
dos-control icmpv6
This command enables Maximum ICMPv6 Packet Size Denial of Service protections. If the
mode is enabled, Denial of Service prevention is active for this type of attack. If ICMPv6 Echo
Request (PING) packets ingress having a size greater than the configured value, the packets
will be dropped if the mode is enabled.
Default
Format dos-control icmpv6 <0-16384>
Mode
no dos-control icmpv6
This command disables Maximum ICMP Packet Size Denial of Service protections.
Format no dos-control icmpv6
Mode
Global Config
disabled <512>
Global Config
Global Config
disabled <512>
Global Config
Global Config