NETGEAR GSM7228PS-100NAS telnetcon timeout, show telnet

Management Commands
647
ProSafe Managed Switch
telnetcon timeout
Use this command to set the Telnet connection session timeout value, in minutes. A session
is active as long as the session has not been idle for the value set. The time is a decimal
value from 1 to 160.
Note: When you change the timeout value, the new value is applied to all
active and inactive sessions immediately. Any sessions that have
been idle longer than the new timeout value are disconnected
immediately.
no telnetcon timeout
Use this command to set the Telnet connection session timeout value to the default.
Note: Changing the timeout value for active sessions does not become
effective until the session is reaccessed. Also, any keystroke
activates the new timeout duration.
show telnet
Use this command to display the current outbound Telnet settings. In other words, these
settings apply to Telnet connections initiated from the switch to a remote system.
Format show telnet
Modes • Privileged EXEC
• User EXEC
Default 5
Format telnetcon timeout <1-160>
Mode Privileged EXEC
Format no telnetcon timeout
Mode Privileged EXEC