NETGEAR GSM7228PS-100NAS Hypertext Transfer Protocol (HTTP) Commands

Management Commands
652
ProSafe Managed Switch
no crypto key generate rsa
Use this command to delete the RSA key files from the device.
Format no crypto key generate rsa
Mode
crypto key generate dsa
Use this command to generate a DSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded DSA key files.
Format crypto key generate dsa
Mode
no crypto key generate dsa
Use this command to delete the DSA key files from the device.
Format no crypto key generate dsa
Mode
Hypertext Transfer Protocol (HTTP) Commands
This section describes the commands you use to configure HTTP and secure HTTP access
to the switch. Access to the switch by using a Web browser is enabled by default. Everything
you can view and configure by using the CLI is also available by using the Web.
ip http server
Use this command to enable access to the switch through the Web interface. When access is
enabled, the user can login to the switch from the Web interface. When access is disabled,
the user cannot login to the switch's Web server. Disabling the Web interface takes effect
immediately. All interfaces are affected.
Default
Format ip http server
Mode
Global Config
Global Config
Global Config
enabled
Privileged EXEC