Switching Commands
167
ProSafe Managed Switch
Flooding of unregistered multicast data packets to all ports in the VLAN.
Default
Format set igmp
Mode • Global Config
• Interface Config
Format set igmp <vlanid>
Mode
no set igmp
This command disables IGMP Snooping on the system, an interface or a VLAN.
Format no set igmp
Mode • Global Config
• Interface Config
Format no set igmp <vlanid>
Mode
set igmp interfacemode
This command enables IGMP Snooping on all interfaces. If an interface has IGMP Snooping
enabled and you enable this interface for routing or enlist it as a member of a port-channel
(LAG), IGMP Snooping functionality is disabled on that interface. IGMP Snooping
functionality is re-enabled if you disable routing or remove port-channel (LAG) membership
from an interface that has IGMP Snooping enabled.
Default
Format set igmp interfacemode
Mode
no set igmp interfacemode
This command disables IGMP Snooping on all interfaces.
Format no set igmp interfacemode
Mode
set igmp fast-leave
This command enables or disables IGMP Snooping fast-leave admin mode on a selected
interface or VLAN. Enabling fast-leave allows the switch to immediately remove the layer 2
disabled
VLAN Config
VLAN Config
disabled
Global Config
Global Config