NETGEAR GSM7228PS-100NAS authentication timeout, show captive-portal

Captive Portal Commands
749
ProSafe Managed Switch
no https port
Use this command to reset the HTTPs port to the default HTTPS port 443.
Format no https port
Mode
authentication timeout
Use this command to configure the authentication timeout. If the user does not enter valid
credentials within this time limit, the authentication page needs to be served again in order for
the client to gain access to the network.
Default 300
Format authentication timeout <60-600>
Mode
no authentication timeout
Use this command to reset the authentication timeout to the default.
Default 300
Format no authentication timeout
Mode
show captive-portal
Use this command to display the status of the captive portal feature.
Format show captive-portal
Mode
Example
(switch)#show captive-portal
Administrative Mode....................... Disabled
Captive Portal Configuration mode
Captive Portal Configuration mode
Captive Portal Configuration mode
Privileged EXEC mode
Term Definition
Administrative
Mode The administrative mode is enabled or disabled.
Operational
Status The Operational status is enabled or disabled.
Disable Reason If the operational status is disabled. This field shows the reason why the operational is
disabled.
CP IP Address It is the captive portal server IP address.