Switching Commands
61
ProSafe Managed Switch
tree. The <unit/slot/port> is the desired switch port. In this case, the following are displayed.
Term Definition
Port Identifier The port identifier for this port within the CST.
Port Priority The priority of the port within the CST.
Port Forwarding
State The forwarding state of the port within the CST.
Port Role The role of the specified interface within the CST.
Auto-Calculate
Port Path Cost Indicates whether auto calculation for port path cost is enabled or not (disabled).
Port Path Cost The configured path cost for the specified interface.
Auto-Calculate
External Port
Path Cost
Indicates whether auto calculation for external port path cost is enabled.
External Port
Path Cost The cost to get to the root bridge of the CIST across the boundary of the region. This
means that if the port is a boundary port for an MSTP region, then the external path cost
is used.
Designated
Root Identifier of the designated root for this port within the CST.
Root Path Cost The root path cost to the LAN by the port.
Designated
Bridge The bridge containing the designated port.
Designated Port
Identifier Port on the Designated Bridge that offers the lowest cost to the LAN.
Topology
Change
Acknowledgem
ent
Value of flag in next Configuration Bridge Protocol Data Unit (BPDU) transmission
indicating if a topology change is in progress for this port.
Hello Time The hello time in use for this port.
Edge Port The configured value indicating if this port is an edge port.
Edge Port
Status The derived value of the edge port status. True if operating as an edge port; false
otherwise.
Point To Point
MAC Status Derived value indicating if this port is part of a point to point link.
CST Regional
Root The regional root identifier in use for this port.
CST Internal
Root Path Cost The internal root path cost to the LAN by the designated external port.
Loop
Inconsistent
State
The current loop inconsistent state of this port in this MST instance. When in loop
inconsistent state, the port has failed to receive BPDUs while configured with loop guard
enabled. Loop inconsistent state maintains the port in a "blocking" state until a
subsequent BPDU is received.