Switching Commands
133
ProSafe Managed Switch
no port-channel static
This command sets the static mode on a particular port-channel (LAG) interface to the default
value. This command will be executed only for interfaces of type port-channel (LAG).
Format no port-channel static
Mode
port lacpmode
This command enables Link Aggregation Control Protocol (LACP) on a port.
Default
Format port lacpmode
Mode
no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format no port lacpmode
Mode
port lacpmode enable all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format port lacpmode enable all
Mode
no port lacpmode enable all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format no port lacpmode enable all
Mode
port lacptimeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type (actor or
partner) to either long or short timeout.
Default
Format port lacptimeout {actor | partner} {long | short}
Mode
Interface Config
enabled
Interface Config
Interface Config
Global Config
Global Config
long
Interface Config