NETGEAR GSM7228PS-100NAS show dot1x clients

Switching Commands
108
ProSafe Managed Switch
show dot1x clients
This command displays 802.1x client information. This command also displays information
about the number of clients that are authenticated using Monitor mode and using 802.1X.
Format show dot1x clients {<unit/slot/port> | all}
Mode
EAPOL Logoff
Frames
Received
The number of EAPOL logoff frames that have been received by this authenticator.
Last EAPOL
Frame Version The protocol version number carried in the most recently received EAPOL frame.
Last EAPOL
Frame Source The source MAC address carried in the most recently received EAPOL frame.
EAP
Response/Id
Frames
Received
The number of EAP response/identity frames that have been received by this
authenticator.
EAP Response
Frames
Received
The number of valid EAP response frames (other than resp/id frames) that have been
received by this authenticator.
EAP Request/Id
Frames
Transmitted
The number of EAP request/identity frames that have been transmitted by this
authenticator.
EAP Request
Frames
Transmitted
The number of EAP request frames (other than request/identity frames) that have been
transmitted by this authenticator.
Invalid EAPOL
Frames
Received
The number of EAPOL frames that have been received by this authenticator in which the
frame type is not recognized.
EAP Length
Error Frames
Received
The number of EAPOL frames that have been received by this authenticator in which the
frame type is not recognized.
Privileged EXEC
Term Definition
Clients
Authenticated
using Monitor
Mode
Indicates the number of the Dot1x clients authenticated using Monitor mode.
Clients
Authenticated
using Dot1x
Indicates the number of Dot1x clients authenticated using 802.1x authentication process.
Logical
Interface The logical port number associated with a client.
Interface The physical port to which the supplicant is associated.
Term Definition