NETGEAR GSM7228PS-100NAS 802.1X Supplicant Commands

Switching Commands
109
ProSafe Managed Switch
show dot1x users
This command displays 802.1x port security user information for locally configured users.
Format show dot1x users <unit/slot/port>
Mode
Users
802.1X Supplicant Commands
802.1X (“dot1x”) supplicant functionality is on point-to-point ports. The administrator can
configure the user name and password used in authentication and capabilities of the
supplicant port.
User Name The user name used by the client to authenticate to the server.
Supplicant MAC
Address The supplicant device MAC address.
Session Time The time since the supplicant is logged on.
Filter ID Identifies the Filter ID returned by the RADIUS server when the client was authenticated.
This is a configured DiffServ policy name on the switch.
VLAN ID The VLAN assigned to the port.
VLAN Assigned The reason the VLAN identified in the VLAN ID field has been assigned to the port.
Possible values are RADIUS, Unauthenticated VLAN, or Default. When the VLAN
Assigned reason is Default, it means that the VLAN was assigned to the port because
the PVID of the port was that VLAN ID.
Session
Timeout This value indicates the time for which the given session is valid. The time period in
seconds is returned by the RADIUS server on authentication of the port. This value is
valid for the port only when the port-control mode is not MAC-based.
Session
Termination
Action
This value indicates the action to be taken once the session timeout expires. Possible
values are Default and Radius-Request. If the value is Default, the session is terminated
and client details are cleared. If the value is Radius-Request, then a reauthentication of
the client is performed.
Privileged EXEC
Term Definition
Users configured locally to have access to the specified port.
Term Definition