NETGEAR GSM7228PS-100NAS arp cachesize, arp dynamicrenew

Routing Commands
242
ProSafe Managed Switch
address is reachable. The device only responds if all next hops in its route to the destination
are through interfaces other than the interface that received the ARP request.
Default
Format ip proxy-arp
Mode
no ip proxy-arp
This command disables proxy ARP on a router interface.
Format no ip proxy-arp
Mode
arp cachesize
This command configures the ARP cache size. The ARP cache size value is a platform
specific integer value. The default size also varies depending on the platform.
Format arp cachesize <platform specific integer value>
Mode
no arp cachesize
This command configures the default ARP cache size.
Format no arp cachesize
Mode
arp dynamicrenew
This command enables the ARP component to automatically renew dynamic ARP entries
when they age out.
Default
Format arp dynamicrenew
Mode
no arp dynamicrenew
This command prevents dynamic ARP entries from renewing when they age out.
Format no arp dynamicrenew
Mode
enabled
Interface Config
Interface Config
Global Config
Global Config
enabled
Privileged EXEC
Privileged EXEC