Utility Commands
531
ProSafe Managed Switch
boot host auto-save
This command is used to enable automatically saving the downloaded configuration on the
switch.
Default
Format boot host auto-save
Mode
no boot host auto-save
This command is used to disable automatically saving the downloaded configuration on the
switch.
Format no boot host auto-save
Mode
boot autoinstall start
The command is used to start Auto Install on the switch. Auto Install tries to download a
config file from a TFTP server.
Format boot autoinstall start
Mode
boot autoinstall stop
The command is used to A user may terminate the Auto Install process at any time prior to
the downloading of the config file. This is most optimally done when the switch is
disconnected from the network, or if the requisite configuration files have not been configured
on TFTP servers. Termination of the Auto Install process ends further periodic requests for a
host-specific file.
Format boot autoinstall stop
Mode
boot host retry-count
This command is used to set the number of attempts to download a configuration. The valid
range is from 1 to 6.
Default
Format boot host retry-count <count>
Mode
Disabled
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
3
Privileged EXEC