Quality of Service (QoS) Commands
481
ProSafe Managed Switch
Note: The CLI mode is changed to Policy-Class-Map Config when this
command is successfully executed.
no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy. <classname> is the names of an existing DiffServ class.
Note: This command removes the reference to the class definition for the
specified policy.
mark cos
This command marks all packets for the associated traffic stream with the specified class of
service value in the priority field of the 802.1p header (the only tag in a single tagged packet
or the first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not
already contain this header, one is inserted. The CoS value is an integer from 0 to 7.
Default
Format mark-cos <0-7>
Mode
Incompatibilities
mark cos-as-sec-cos
This command marks outer VLAN tag priority bits of all packets as the inner VLAN tag
priority, marking CoS as Secondary CoS. This essentially means that the inner VLAN tag
CoS is copied to the outer VLAN tag CoS.
Format class <classname>
Mode Policy-Map Config
Format no class <classname>
Mode Policy-Map Config
1
Policy-Class-Map Config
Drop, Mark IP DSCP, IP Precedence, Police
Format mark-cos-as-sec-cos