NETGEAR GSM7228PS-100NAS dot1x supplicant timeout start-period, dot1x supplicant timeout held-period

Switching Commands
111
ProSafe Managed Switch
no dot1x supplicant max-start
Use this command to set the max-start value to the default.
Format no dot1x supplicant max-start
Mode
dot1x supplicant timeout start-period
Use this command to configure the start period timer interval to wait for the EAP identity
request from the authenticator.
Default
Format dot1x supplicant timeout start-period <1-65535 seconds>
Mode
no dot1x supplicant timeout start-period
Use this command to set the start-period value to the default.
Format no dot1x supplicant timeout start-period
Mode
dot1x supplicant timeout held-period
Use this command to configure the held period timer interval to wait for the next
authentication on previous authentication fail.
Default
Format dot1x supplicant timeout held-period <1-65535 seconds>
Mode
no dot1x supplicant timeout held-period
Use this command to set the held-period value to the default value.
Format no dot1x supplicant timeout held-period
Mode
Interface Config
30 seconds
Interface Config
Interface Config
30 seconds
Interface Config
Interface Config