Quality of Service (QoS) Commands
506
ProSafe Managed Switch
Time Range Commands for Time-Based ACLs
Time-based ACLs allow one or more rules within an ACL to be based on time. Each ACL rule
within an ACL, except for the implicit deny all rule, can be configured to be active and
operational only during a specific time period. The time range commands allow you to define
specific times of the day and week to implement time-based ACLs. The time range is
identified by a name and can then be referenced by an ACL rule defined with in an ACL.

time-range

Use this command to create a time range identified by name, consisting of one absolute time
entry and/or one or more periodic time entries. The name parameter is a case-sensitive,
alphanumeric string from 1 to 31 characters that uniquely identifies the time range. An
alpha-numeric string is defined as consisting of only alphabetic, numeric, dash, underscore,
or space characters. If a time range by this name already exists, this command enters
Time-Range config mode to allow updating the time range entries
Note: When you successfully execute this command, the CLI mode
changes to Time-Range Config mode.
Format time-range <name>
Mode
no time-range
Use this command to delete a time-range identified by name.
Format no time-range <name>
Mode

absolute

Use this command to add an absolute time entry to a time range. Only one absolute time
entry is allowed per time-range. The time parameter is based on the currently configured
time zone. The [start time date] parameters indicate the time and date at which the
configuration that referenced the time range starts going into effect. The time is expressed in
a 24-hour clock, in the form of hours:minutes. For example, 8:00 is 8:00 am and 20:00 is 8:00
pm. The date is expressed in the format day month year. If no start time and date are
specified, the configuration statement is in effect immediately. The [end time date]
parameters indicate the time and date at which the configuration that referenced the time
Global Config
Global Config