Switching Commands
171
ProSafe Managed Switch
set igmp mrouter interface
This command configures the interface as a multicast router interface. When configured as a
multicast router interface, the interface is treated as a multicast router interface in all VLANs.
Default
Format set igmp mrouter interface
Mode
no set igmp mrouter interface
This command disables the status of the interface as a statically configured multicast router
interface.
Format no set igmp mrouter interface
Mode
set igmp report-suppression
Use this command to suppress the IGMP reports on a given VLAN ID. In order to optimize
the number of reports traversing the network with no added benefits, a Report Suppression
mechanism is implemented. When more than one client responds to an MGMD query for the
same Multicast Group address within the max-response-time, only the first response is
forwarded to the query and others are suppressed at the switch.
Default
Format set igmp report-suppression <1-4093>
Mode
no set igmp report-suppression
Use this command to restore the system default.
Format no set igmp report-suppression
Mode
set igmp header-validation
This command enables the validation of 3 igmp header fields TTL (Time To Live), ToS (Type of
Service), and Router Alert options. The fields validated depend on the IGMP version being used.
IGMPv1 - Only the TTL field is validated.
IGMPv2 - TTL and Router Alert fields are validated.
disabled
Interface Config
Interface Config
Disabled
VLAN Config
VLAN Config