NETGEAR GSM7228PS-100NAS area virtual-link dead-interval (OSPF), area virtual-link hello-interval (OSPF)

Routing Commands
289
ProSafe Managed Switch
specified. The default value for authentication type is none. Neither the default password key
nor the default key id are configured.
Default
Format area <areaid> virtual-link <neighbor> authentication {none | {simple
<key>} | {encrypt <key> <keyid>}}
Mode
no area virtual-link authentication
This command configures the default authentication type for the OSPF virtual interface
identified by <areaid> and <neighbor>. The <neighbor> parameter is the Router ID of
the neighbor.
Format no area <areaid> virtual-link <neighbor> authentication
Mode
area virtual-link dead-interval (OSPF)
This command configures the dead interval for the OSPF virtual interface on the virtual
interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the
Router ID of the neighbor. The range for seconds is 1 to 65535.
Default
Format area <areaid> virtual-link <neighbor> dead-interval <seconds>
Mode
no area virtual-link dead-interval
This command configures the default dead interval for the OSPF virtual interface on the
virtual interface identified by <areaid> and <neighbor>. The <neighbor> parameter is
the Router ID of the neighbor.
Format no area <areaid> virtual-link <neighbor> dead-interval
Mode
area virtual-link hello-interval (OSPF)
This command configures the hello interval for the OSPF virtual interface on the virtual
interface identified by <areaid> and <neighbor>. The <neighbor> parameter is the
Router ID of the neighbor. The range for <seconds> is 1 to 65535.
Default
Format area <areaid> virtual-link <neighbor> hello-interval <1-65535>
Mode
none
Router OSPF Config
Router OSPF Config
40
Router OSPF Config
Router OSPF Config
10
Router OSPF Config