NETGEAR GSM7228PS-100NAS ip https authentication, ip http secure-port

Management Commands
657
ProSafe Managed Switch
ip https authentication
Use this command to specify the authentication methods for http server users. The additional
methods of authentication are used only if the previous method returns an error, not if it fails.
To ensure that the authentication succeeds even if all methods return an error, specify none
as the final method in the command line. If none is specified as an authentication method
after radius, no authentication is used if the radius server is down.
Format ip https authentication method1 [method2 ...]
Mode
Local
Radius
Tacacs
None
no ip https authentication
Use this command to restore the authentication methods to the default for http server users.
Format no ip https authentication method1 [method2 ...]
Mode
ip http secure-port
Use this command to set the SSL port where port can be 1-65535 and the default is port 443.
Default
Format ip http secure-port <portid>
Mode
no ip http secure-port
Use this command to reset the SSL port to the default value.
Format no ip http secure-port
Mode
Global ConfigC
Term Definition
Uses the local username database for authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS servers for authentication.
Uses no authentication.
Global Config
443
Privileged EXEC
Privileged EXEC