NETGEAR GSM7228PS-100NAS capability opaque, clear ip ospf, clear ip ospf configuration, clear ip ospf counters

Routing Commands
292
ProSafe Managed Switch
no bandwidth
Use this command to set the interface bandwidth to its default value.
Format no bandwidth
Mode
capability opaque
Use this command to enable Opaque Capability on the Router. The information contained in
Opaque LSAs may be used directly by OSPF or indirectly by an application wishing to
distribute information throughout the OSPF domain. The 7000 series supports the storing and
flooding of Opaque LSAs of different scopes.
Default
Format capability opaque
Mode
no capability opaque
Use this command to disable opaque capability on the router.
Format no capability opaque
Mode
clear ip ospf
Use this command to disable and re-enable OSPF.
Format clear ip ospf
Mode
clear ip ospf configuration
Use this command to reset the OSPF configuration to factory defaults.
Format clear ip ospf configuration
Mode
clear ip ospf counters
Use this command to reset global and interface statistics.
Format clear ip ospf counters
Mode
Interface Config
disabled
Router OSPF Config
Router OSPF Config
Privileged EXEC
Privileged EXEC
Privileged EXEC