Routing Commands
321
ProSafe Managed Switch
The following shows example CLI display output for the command.
(netgear switch) #show ip ospf traffic
Time Since Counters Cleared: 4000 seconds
OSPFv2 Packet Statistics
Hello Database Desc LS Request LS Update LS ACK Total
Recd: 500 10 20 50 20 600
Sent: 400 8 16 40 16 480
LSAs Retransmitted................0
LS Update Max Receive Rate........20 pps
LS Update Max Send Rate...........10 pps
Number of LSAs Received
T1 (Router).......................10
T2 (Network)......................0
T3 (Net Summary)..................300
T4 (ASBR Summary).................15
T5 (External).....................20
T7 (NSSA External)................0
T9 (Link Opaque)..................0
T10 (Area Opaque).................0
T11 (AS Opaque)...................0
Total.............................345
OSPFv2 Queue Statistics
Current Max Drops Limit
Hello 0 10 0 500
ACK 2 12 0 1680
Data 24 47 0 500
Event 1 8 0 1000
show ip ospf virtual-link

This command displays the OSPF Virtual Interface information for a specific area and

neighbor. The <areaid> parameter identifies the area and the <neighbor> parameter

identifies the neighbor's Router ID.

Format show ip ospf virtual-link <areaid> <neighbor>
Modes • Privileged EXEC
• User EXEC
Number of LSAs
Received The number of LSAs of each type received since OSPF counters were last cleared.
OSPFv2 Queue
Statistics For each OSPFv2 message queue, the current count, the high water mark, the number of
packets that failed to be enqueued, and the queue limit. The high water marks are not cleared
when OSPF counters are cleared.
Term Definition
Area ID The area id of the requested OSPF area.
Neighbor
Router ID The input neighbor Router ID.
Parameter Description