NETGEAR GSM7228PS-100NAS LLDP-MED Commands

Switching Commands
203
ProSafe Managed Switch
LLDP-MED Commands
Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057)
provides an extension to the LLDP standard. Specifically, LLDP-MED provides extensions for
network configuration and policy, device location, Power over Ethernet (PoE) management
and inventory management.
lldp med
Use this command to enable MED. By enabling MED, you will be effectively enabling the
transmit and receive function of LLDP.
Default
Format lldp med
Mode
no lldp med
Use this command to disable MED.
Format no lldp med
Mode
lldp med confignotification
Use this command to configure all the ports to send the topology change notification.
Default
Format lldp med confignotification
Mode
System
Capabilities
Supported
Indicates the primary function(s) of the device.
System
Capabilities
Enabled
Shows which of the supported system capabilities are enabled.
Management
Address The type of address and the specific address the local LLDP agent uses to send and
receive information.
enabled
Interface Config
Interface Config
enabled
Interface Config
Term Definition