hash-mask-length
priority
interval
IPv6 Multicast Commands
446
ProSafe Managed Switch
no ipv6 pim bsr-candidate
Use this command to disable the router to announce its candidacy as a bootstrap router
(BSR).
Format no ipv6 pim bsr-candidate interface [<unit/slot/port> | vlan
<1-4093>] [hash-mask-length] [priority]
Mode
ipv6 pim dr-priority
Use this command to set the priority value for which a router is elected as the designated
router (DR).
Default
Format ipv6 pim dr-priority <0-2147483647>
Mode
no ipv6 pim dr-priority
Use this command to disable the interface from being the BSR border.
Format no ipv6 pim dr-priority
Mode
ipv6 pim join-prune-interval
Use this command to configure the interface join/prune interval for the PIM-SM router. The
join/prune interval is specified in seconds. This parameter can be configured to a value from
0 to 18000.
Parameters Description
Length of a mask (32 bits maximum) that is to be ANDed with the group address before
the hash function is called. All groups with the same seed hash correspond to the same
RP. For example, if this value was 24, only the first 24 bits of the group addresses
matter. This allows you to get one RP for multiple groups.
Priority of the candidate BSR. The range is an integer from 0 to 255. The BSR with the
larger priority is preferred. If the priority values are the same, the router with the larger
IP address is the BSR. The default value is 0.
(Optional) Indicates the BSR candidate advertisement interval. The range is from 1 to
16383 seconds. The default value is 60 seconds.
Global Config
1
Interface Config
Interface Config
Default 60