NETGEAR GSM7228PS-100NAS Secure Shell (SSH) Commands

Outbound
Telnet Login
Timeout
Maximum
Number of
Outbound
Telnet Sessions
Allow New
Outbound
Telnet Sessions
Management Commands
648
ProSafe Managed Switch
show telnetcon
Use this command to display the current inbound Telnet settings. In other words, these
settings apply to Telnet connections initiated from a remote system to the switch.
Format show telnetcon
Modes • Privileged EXEC
• User EXEC
Remote
Connection
Login Timeout
(minutes)
Maximum
Number of
Remote
Connection
Sessions
Allow New
Telnet Sessions
Secure Shell (SSH) Commands
This section describes the commands you use to configure SSH access to the switch. Use
SSH to access the switch from a remote management host.
Note: The system allows a maximum of 5 SSH sessions.
Term Definition
The number of minutes an outbound Telnet session is allowed to remain inactive before
being logged off.
The number of simultaneous outbound Telnet connections allowed.
Indicates whether outbound Telnet sessions will be allowed.
Term Definition
This object indicates the number of minutes a remote connection session is allowed to
remain inactive before being logged off. May be specified as a number from 1 to 160.
The factory default is 5.
This object indicates the number of simultaneous remote connection sessions allowed.
The factory default is 5.
New Telnet sessions will not be allowed when this field is set to no. The factory default
value is yes.